隨著科學技術的發展，電源趨于密集和小型化，對電源的穩定性提出了更高的要求。為了防止濕氣、粉塵和有害氣體對電子元器件的損壞，減緩振動，防止外力損壞，穩定元器件參數，極大限度地減少外界的不利影響，有必要對電源進行封裝。
With the development of science and technology, the power supply tends to be dense and miniaturized, which puts forward higher requirements for the stability of the power supply. In order to prevent the damage of moisture, dust and harmful gas to electronic components, slow down vibration, prevent external force damage, stabilize component parameters and greatly reduce the adverse effects of the outside world, it is necessary to package the power supply.
例如筆記本電腦充電器、手機充電器等大部分電源在生產過程中都會采用灌膠工藝(根據實際應用選擇AB膠)。混合倒入電源中可起到防水、防潮、防靜電和散熱的作用
For example, most power supplies such as laptop charger and mobile phone charger will adopt glue filling process in the production process (AB glue is selected according to the actual application). Mixing and pouring into the power supply can play the role of waterproof, moisture-proof, anti-static and heat dissipation
常用的有三種類型;三軸臺式全自動灌膠機、半自動灌膠機、全自動灌膠機
There are three types of commonly used; Three axis desktop full-automatic glue filling machine, semi-automatic glue filling machine and full-automatic glue filling machine

動力灌膠機的操作特別簡單;先調整出膠比例，再根據設備說明書設定程序補膠。設備程序設定每秒出膠量、出膠時間、灌膠路徑、灌完產品后的暫停時間。操作非常簡單
The operation of the power glue filling machine is particularly simple; Adjust the glue delivery ratio first, and then set the procedure for glue replenishment according to the equipment manual. The equipment program sets the glue output per second, glue output time, glue filling path and pause time after filling the product. The operation is very simple
三軸自動灌膠機一般以小電源為主，即灌膠量從幾克到幾十克為例;電動牙刷電源、燈泡電源等灌膠方法也很簡單。將電源放入治具，然后將治具放在灌膠機的臺面上，按下啟動開關，機器將由先灌到尾，灌完所有產品后自動停止。然后手動將夾具從桌面上移開，將電源夾具安裝在另一塊板上，按下啟動鍵，開始循環。
Three axis automatic glue filling machine generally focuses on small power supply, that is, the glue filling amount ranges from a few grams to tens of grams, for example; The glue filling methods such as electric toothbrush power supply and bulb power supply are also very simple. Put the power supply into the fixture, then put the fixture on the table of the glue filling machine, press the start switch, the machine will fill from the first to the end, and stop automatically after filling all products. Then manually remove the fixture from the desktop, install the power fixture on another board, press the start key to start the cycle.
半自動灌膠機一般放在流水線旁邊。手動將電源放在插座頭下，然后踩腳踏開關。機器會自動灌膠。注滿后自動停止，然后手動將注滿的電源放在流水線上。半自動灌膠機適用于各種電源，無論大小。
Semi automatic glue filling machine is generally placed next to the assembly line. Manually place the power supply under the socket head, and then step on the foot switch. The machine will automatically fill glue. Automatically stop after filling, and then manually place the filled power supply on the pipeline. The semi-automatic glue filling machine is suitable for all kinds of power supplies, regardless of size.
全自動灌膠機一般在流水線上使用。裝有電源的夾具整板放置在傳輸線上。本機自動灌膠，灌膠后自動送入烘箱，節省了多次人工，生產效率更高。
Automatic glue filling machine is generally used on the assembly line. The whole board of the clamp equipped with power supply is placed on the transmission line. The machine automatically fills the glue and automatically sends it to the oven after filling, which saves many times of labor and has higher production efficiency.
以上的精彩內容來自： 雙組份打膠機更多的精彩內容請點擊進入我們的網站：http://www.txxfj.com，我們后續會有更多的內容為您
The above highlights come from: two-component gluing machine. For more highlights, please click to enter our website: http://www.txxfj.com , we will have more content for you later