在中空玻璃全流程生產中，清洗段是決定玻璃成品品質的第一道關鍵關卡，傳統清洗設備毛刷粗糙、風力不足、噪音擾民、銜接不暢，不僅清洗不徹底，還極易劃傷樓宇玻璃、三英玻璃等高端嬌貴玻璃，同時干燥不徹底影響后續封膠、充氣工序，導致產品瑕疵率居高不下。即將亮相上海展會的新款中空玻璃生產線，針對行業清洗痛點進行全方位革新，核心清洗段實現四大技術升級，兼顧**潔凈度、不傷片、低噪音、高適配**，完美適配各類高端中空玻璃加工，徹底破解傳統清洗設備的諸多弊端，成為本次展會的重磅亮點產品。

　　In the entire production process of insulating glass, the cleaning section is the first key checkpoint that determines the quality of the glass product. Traditional cleaning equipment has rough brushes, insufficient wind power, noise disturbance, and poor connection. Not only is the cleaning incomplete, but it is also prone to scratching high-end and precious glass such as building glass and quartz glass. At the same time, incomplete drying affects the subsequent sealing and inflation processes, resulting in a high defect rate of the product. The new insulated glass production line, which will soon be unveiled at the Shanghai exhibition, will undergo comprehensive innovation to address the pain points of industry cleaning. The core cleaning section has achieved four major technological upgrades, taking into account * * cleanliness, no damage to the sheet, low noise, and high adaptability * *, perfectly adapting to various high-end insulated glass processing, completely solving the many drawbacks of traditional cleaning equipment, and becoming a heavyweight highlight product of this exhibition.

　　纏繞式精密毛刷，細如牛毛，高端嬌貴玻璃零損傷

　　Spiral wound precision brush, as fine as cow hair, high-end delicate glass with zero damage

　　這款展會新款中空玻璃生產線，率先在清洗核心部件實現突破，摒棄傳統普通毛刷，采用**先進纏繞式毛刷**，毛刷絲細如牛毛，材質柔韌細膩，觸感溫和無硬物感，徹底告別傳統毛刷過硬、過粗劃傷玻璃表面的問題。針對樓宇玻璃、三英玻璃等表面嬌貴、易刮花的高端玻璃品類，這款毛刷能輕柔貼合玻璃表面，深度清理粉塵、油污、膠漬等各類雜質，清洗無死角、潔凈度拉滿，清洗后玻璃表面光潔透亮，無劃痕、無磨損，完整保留玻璃原有質感與通透度，解決了高端玻璃清洗易損傷的行業難題。

　　This new insulated glass production line at the exhibition is the first to achieve a breakthrough in cleaning core components, abandoning traditional ordinary brushes and adopting advanced winding brushes. The bristles are as fine as cow hair, the material is flexible and delicate, and the touch is mild without any hard texture. It completely bids farewell to the problem of traditional brushes being too hard and rough to scratch the glass surface. For high-end glass categories such as building glass and three inch glass, which have delicate surfaces and are prone to scratches, this brush can gently adhere to the surface of the glass, deeply clean various impurities such as dust, oil stains, and glue stains. The cleaning has no dead corners and the cleanliness is full. After cleaning, the glass surface is smooth and transparent, without scratches or wear, and fully retains the original texture and transparency of the glass, solving the industry problem of easy damage in high-end glass cleaning.

　　纏繞式結構相比傳統毛刷，受力更均勻，轉動平穩無跳動，不會因毛刷晃動磕碰玻璃，適配不同厚度、不同尺寸的玻璃清洗，不管是常規門窗玻璃，還是大尺寸高端幕墻玻璃，都能實現高效潔凈清洗，清洗合格率較傳統設備提升40%以上，大幅減少玻璃損耗。

　　Compared with traditional brushes, the winding structure has more uniform force distribution, smooth rotation without jumping, and will not collide with glass due to brush shaking. It is suitable for cleaning glass of different thicknesses and sizes. Whether it is conventional door and window glass or large-sized high-end curtain wall glass, it can achieve efficient and clean cleaning. The cleaning pass rate is increased by more than 40% compared to traditional equipment, greatly reducing glass loss.

　　三大革新細節，降噪增效，生產銜接更順暢

　　Three major innovative details, noise reduction and efficiency improvement, smoother production connection

　　除了核心毛刷升級，清洗段還進行了三大細節優化，全方位提升設備性能。其一，搭載專屬**降噪設施**，針對清洗機運行噪音大、影響車間環境的痛點，通過內部結構優化與降噪組件加持，大幅降低設備運行分貝，打造更安靜的生產環境，改善車間作業體驗，具體降噪工藝與效果，將在上海展會現場實地展示。

　　In addition to upgrading the core brush, the cleaning section has also been optimized in three major details to comprehensively improve equipment performance. Firstly, equipped with exclusive * * noise reduction facilities * *, targeting the pain points of high noise during the operation of the cleaning machine and affecting the workshop environment, through internal structural optimization and noise reduction components, the decibels of equipment operation are significantly reduced, creating a quieter production environment and improving the workshop operation experience. The specific noise reduction process and effect will be demonstrated on-site at the Shanghai exhibition.

　　其二，風刀段全面升級，告別傳統不銹鋼風刀，采用**高強度鋁合金材質風刀**，整體一體化流線型設計，材質更輕便、導風效果更優，配合后端大功率風機，風力更強勁、風壓更均勻，形成的強勁風幕能快速吹干玻璃表面水分，干燥速度提升35%，杜絕水漬殘留，避免因干燥不徹底導致的封膠起泡、密封性差等問題，保障后續工序高效推進。

　　Secondly, the wind blade section has been fully upgraded, bidding farewell to traditional stainless steel wind blades and adopting high-strength aluminum alloy material wind blades with an integrated streamlined design. The material is lighter and the air guiding effect is better. Combined with a high-power rear fan, the wind force is stronger and the air pressure is more uniform, forming a strong air curtain that can quickly dry the moisture on the glass surface, increasing the drying speed by 35%, eliminating water stains and avoiding problems such as foaming and poor sealing caused by incomplete drying, ensuring efficient progress of subsequent processes.

　　其三，新增專屬**防護銜接門**，適配生產線高速運行需求，玻璃清洗完成輸出時，可通過防護門及時罩住，有效防止玻璃偏移、晃動，實現清洗段與后續傳送段的無縫銜接，避免高速運行中玻璃磕碰、掉落，提升生產線整體運行穩定性與連貫性，讓全流程生產更順暢、更高效。

　　Thirdly, a dedicated * * protective connection door * * has been added to meet the high-speed operation requirements of the production line. When the glass cleaning is completed, it can be covered in a timely manner through the protective door, effectively preventing glass displacement and shaking, achieving seamless connection between the cleaning section and the subsequent conveying section, avoiding glass collision and falling during high-speed operation, improving the overall stability and continuity of the production line, and making the entire production process smoother and more efficient.

　　展會重磅新品，全鏈路升級，適配高端生產需求

　　Exhibition heavyweight new products, full chain upgrade, adapted to high-end production needs

　　本次上海展會推出的中空玻璃生產線，并非單一環節升級，而是全鏈路優化，清洗段的四大革新只是核心亮點之一，后續傳送段同樣搭載多項專屬優勢，傳送帶設計、傳動效率、運行穩定性均實現大幅提升，兼顧高速生產與精準把控，適配各類中空玻璃加工廠的規?；?、高品質生產需求。

　　The insulated glass production line launched at this Shanghai exhibition is not a single link upgrade, but a full chain optimization. The four major innovations in the cleaning section are just one of the core highlights, and the subsequent conveyor section is also equipped with multiple exclusive advantages. The conveyor belt design, transmission efficiency, and operational stability have been greatly improved, balancing high-speed production and precise control, and adapting to the large-scale and high-quality production needs of various insulated glass processing plants.

　　這款生產線從清洗源頭把控品質，解決了傳統設備傷玻璃、洗不凈、噪音大、銜接差的痛點，既適合中小工廠提質升級，也能滿足大型工廠高端定制、大批量生產需求，是中空玻璃加工企業搶占高端市場、提升核心競爭力的優選設備。更多展會專屬細節與傳送段核心優勢，敬請持續關注，上海展會現場實地揭秘。

　　This production line controls quality from the cleaning source, solving the pain points of traditional equipment such as glass damage, uncleanliness, loud noise, and poor connection. It is suitable for upgrading small and medium-sized factories, as well as meeting the high-end customization and mass production needs of large factories. It is the preferred equipment for hollow glass processing enterprises to seize the high-end market and enhance their core competitiveness. For more exclusive details and core advantages of the transmission section of the exhibition, please stay tuned and reveal them on-site at the Shanghai exhibition.

　　本文由  中空玻璃生產線  友情奉獻.更多有關的知識請點擊  http://www.txxfj.com/   真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from the insulating glass production line For more related knowledge, please click http://www.txxfj.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.