當前位置：中空玻璃生產線構造及使用功能
時間：2023-03-11 來源：http://www.txxfj.com/ 發布人：昌盛機械
目前中空玻璃生產線主要分為四段：入料段、清洗干燥段、檢查段和合片段。這四個階段又是以相同的方式安放玻璃。結構緊湊，提快捷率、讓中空玻璃生產變得更加簡單方便。
At present, the insulating glass production line is mainly divided into four sections: feeding section, cleaning and drying section, inspection section and combination section. These four stages place the glass in the same way. Compact structure, improve efficiency and make the production of insulating glass more simple and convenient.
清洗箱：清洗箱整體是不銹鋼材料來鍛造的，更加的堅固與整潔。傳送輥也是由耐酸的堿性橡膠輥制作。中間還設計有機玻璃視窗方便人們可以隨時觀察玻璃的清洗情況。
Cleaning box: The whole cleaning box is made of stainless steel, which is more solid and clean. The transfer roller is also made of acid-resistant alkaline rubber roller. A plexiglass window is also designed in the middle to facilitate people to observe the cleaning of glass at any time.
入料段、清洗干燥段：入料段、清洗干燥段采用手動無級調速電機傳動，玻璃平穩地運行。干燥段采用大風力傾斜風刀能使玻璃表面得以干燥。讓整個工序迅速而又干凈利落的進行中。
Feeding section, cleaning and drying section: the feeding section and cleaning and drying section are driven by manual stepless speed regulation motor, and the glass runs smoothly. The glass surface can be dried by using high wind force inclined wind knife in the drying section. Let the whole process proceed quickly and cleanly.
檢查段：檢查段設有燈管，能清晰地檢查玻璃的清洗質量
Inspection section: the inspection section is equipped with lamp tubes, which can clearly check the cleaning quality of glass
合片段：合片段具有玻璃定位及鋁框定位裝置，能完成玻璃定位、鋁框定位安放功能。玻璃由傳送膠輥承托及傳送，傳送輥由電機（輥壓段電機）經過變頻調速器通過鏈輪帶動，玻璃由清洗干燥段低速進入本段，經檢查合格后加速運行至下一工作段，提高工作效率；由變頻調速器控制本段調速電機的運行速度，光電開關控制玻璃進入下一工作段。
Combined segment: the combined segment has glass positioning and aluminum frame positioning devices, which can complete the functions of glass positioning and aluminum frame positioning. The glass is supported and transported by the conveyor rubber roller. The conveyor roller is driven by the motor (rolling section motor) through the frequency converter and the sprocket. The glass enters this section at a low speed from the cleaning and drying section. After passing the inspection, it accelerates to the next working section to improve the working efficiency; The operation speed of the speed regulating motor in this section is controlled by the frequency converter, and the photoelectric switch controls the glass to enter the next working section.
中空玻璃生產線的清洗水路系統為循環系統，其水箱配有恒溫水加熱裝置，水溫可自動保持在合理的范圍。
The cleaning water system of the insulating glass production line is a circulating system. Its water tank is equipped with a thermostatic water heating device, and the water temperature can be automatically maintained in a reasonable range.
水由水泵從水箱抽出，經噴淋水管噴到玻璃表面上，清洗玻璃后流回水箱，循環使用。若水質較差，需配備水處理裝置（用戶自備），水經處理后進入水箱，按上述步驟循環使用。
The water is pumped out of the water tank by the water pump, sprayed onto the glass surface through the spray pipe, and then flows back to the water tank after cleaning the glass for recycling. If the water quality is poor, a water treatment device (provided by the user) is required. The water enters the water tank after treatment and is recycled according to the above steps.
風路系統：由風機通過一對傾斜風刀，吹干玻璃。
Air path system: the glass is dried by a fan through a pair of inclined air knives.
鋁框定位機具有玻璃定位以及鋁框定位安設，能夠完工玻璃定位、鋁框放置及兩片玻璃對齊合片功用。輥壓機的用意是將合完片的玻璃由包膠鋼棍擠壓到央求的尺寸
The aluminum frame positioning machine has the functions of glass positioning and aluminum frame positioning and installation, and can complete the functions of glass positioning, aluminum frame placement and two pieces of glass alignment and lamination. The purpose of the roller press is to squeeze the finished glass from the rubber coated steel rod to the required size
出料機的末尾設有限位安設，避免玻璃掉下。正在電腦序次中條例，當玻璃走出輥壓機后，會主動停下，這時該當實時將玻璃取走。
A limit device is set at the end of the discharge machine to prevent the glass from falling. According to the regulations in the computer sequence, when the glass is complete and comes out of the roller press, it will automatically stop, and then the glass should be taken away in real time.
以上的精彩內容均來自：中空玻璃生產線，更多的精彩內容請點擊進入我們的網站：http://www.txxfj.com進行交流學習，我們后續會不斷的為您提供分享，敬請期待！
The above highlights are from the insulating glass production line. For more highlights, please click to enter our website: http://www.txxfj.com We will continue to share with you in the future!
上一篇：影響中空玻璃設備質量的因素有哪些？
下一篇：全自動丁基膠涂布機的分類
相關新聞 more+
- 中空玻璃生產線的自動化躍遷與產線革命 2026/07/13
- 中空玻璃生產線如何讓兩片玻璃之間“住進”空氣 2026/07/11
- 中空玻璃丁基膠涂布機如何實現“絲滑”涂布？ 2026/07/09
- 雙組份打膠機如何讓密封膠“物盡其用”？ 2026/07/07
- 全自動鋁條折彎機如何為節能門窗打造“鋼筋鐵骨”？ 2026/07/05
- 全自動封膠線破解中空玻璃涂膠均勻性難題 2026/07/03
- 臥式丁基膠涂布機經濟實用實力展現 2026/07/01
- 丁基膠涂布機就是第一道防線的重要作用 2026/06/28
- 雙組份打膠機：精密配比與快捷混合的流體引擎 2026/06/21
- 全自動鋁條折彎機：合理成型與快捷制框的利器 2026/06/19
產品分類Product categories
聯系我們Contact us
