1. 橡膠泵:A橡膠泵、B橡膠泵、比例泵采用我公司研制的高粘度液體往復高壓柱塞泵，結構簡單，性能穩定。高壓閥口采用合金材料特殊處理，硬度可達HRC70o，有效避免粘著劑中硬質顆粒對閥口的損壞。該密封是由增強聚四氟乙烯，耐摩擦和腐蝕，適用于大多數化學溶劑。性能更穩定，使用壽命更長。控制閥采用靜態表面磨削，保證泵內無壓力泄漏。
　　1. Rubber pump: a rubber pump, B rubber pump and proportion pump adopt the high viscosity liquid reciprocating high-pressure plunger pump developed by our company, with simple structure and stable performance. The high-pressure valve port is specially treated with alloy material, the hardness can reach hrc70o, which can effectively avoid the damage of hard particles in the adhesive to the valve port. The seal is made of reinforced polytetrafluoroethylene, resistant to friction and corrosion, suitable for most chemical solvents. More stable performance and longer service life. The control valve adopts static surface grinding to ensure no pressure leakage in the pump.
　　2、電力系統:主泵功率來自液壓系統,系統采用進口泵電機、進口齒輪泵和換向閥配件,等等,我的配方生產的油缸,密封使用德國產品,以確保整個液壓系統噪音低,性能穩定,壽命長。

　　2. Power system: the power of the main pump comes from the hydraulic system. The system adopts imported pump motor, imported gear pump and reversing valve accessories, etc. the oil cylinder produced by my formula is sealed with German products, so as to ensure the low noise, stable performance and long service life of the whole hydraulic system.
　　雙組分膠機
　　Two component glue machine
　　雙組分膠機
　　Two component glue machine
　　3.STJ01雙組份上膠機系統采用壓力板密封全封閉，使膠體與空氣完全隔離，無抗膠及氧化作用。有效延長雙部件保修。
　　3. Stj01 two-component gluing machine system adopts pressure plate to seal and completely seal, so that the colloid is completely isolated from the air and has no anti glue and oxidation effect. Effectively extend the two part warranty.
　　4. 升降系統由手動旋轉閥控制。比例調節可以通過調節擺動桿上滑塊的位置來改變。
　　4. The lifting system is controlled by a manual rotary valve. The proportional adjustment can be changed by adjusting the position of the slider on the swing bar.
　　5. 可安裝電加熱和保溫裝置。
　　5. Electric heating and insulation device can be installed.
　　6. 主要工作參數/主要工藝參數(介質為重油，20℃。不同的粘度介質在不同的溫度下有不同的參數)
　　6. Main working parameters / main process parameters (medium is heavy oil, 20 ℃). Different viscosity media have different parameters at different temperatures)
　　以上就是對雙組份打膠機特點的詳細介紹，想要了解更多請點擊官網http://www.txxfj.com
　　The above is a detailed introduction to the features of the two-component dispenser. For more information, please click http://www.txxfj.com