當前位置：如何正確的使用中空玻璃打膠機？
時間：2022-10-12 來源：http://www.txxfj.com/ 發布人：昌盛機械
如何正確的使用中空玻璃打膠機呢？
How to use the insulating glass sealant machine correctly?
1、一定要記住的是，在中空玻璃打膠機的運行過程中，不要觸碰一些正在運動的關鍵部位和帶電的地方，防止發生危險。同時也要注意的是要讓中空玻璃打膠機保持干凈整潔，不要將無關的物件放在中空玻璃加工設備上，防止發生不必要的麻煩。
1. It must be remembered that during the operation of the insulating glass sealant dispenser, do not touch some key moving parts and live places to prevent danger. At the same time, it should also be noted that the insulating glass sealant dispenser should be kept clean and tidy, and irrelevant objects should not be placed on the insulating glass processing equipment to prevent unnecessary trouble.
2、在打膠過程中注意打膠速度的調試，供膠機和打膠機的相互配合。也要注意人工操作和打膠機的配合。
2. Pay attention to the adjustment of the dispensing speed during dispensing, and the mutual cooperation between the dispensing machine and the dispensing machine. Attention should also be paid to the cooperation between manual operation and glue applicator.3、在開始工作時，確保中空玻璃打膠機能正常運行，打膠是否正常、速度是否勻稱。如發現異常，應立即停機進行檢查，否則可能會導致中空玻璃打膠機的損壞。
3. At the beginning of the operation, ensure that the insulating glass gluing function operates normally, and whether the gluing is normal and the speed is symmetrical. In case of any abnormality, stop the machine immediately for inspection, otherwise the insulating glass sealant dispenser may be damaged.
3、在使用中空玻璃打膠機的時候，安全很重要，另外及時的保養以及正確的使用可以使機器的壽命增加，提高產品質量以及提高產品的成產效率。
3. Safety is very important when using the insulating glass sealant machine. In addition, timely maintenance and correct use can increase the service life of the machine, improve product quality and improve product production efficiency.
4、打膠工作結束的時候，一定要及時的清理膠管中剩余的雙組份膠。一旦膠在膠管中固化，會影響下一天的工程進度。至于怎么清洗？將旋轉開關旋轉到清洗狀態和手動狀態，按下排膠鍵，接下來再按排膠閥，這時會排出黑膠。打開黑膠減壓閥進行排壓，待壓力降下之后擰緊閥門。排白膠操作過程同黑膠一樣。
4. At the end of gluing, the remaining two-component glue in the hose must be cleaned in time. Once the glue is solidified in the rubber tube, the project progress of the next day will be affected. As for how to clean it? Turn the rotary switch to the cleaning state and manual state, press the glue discharge key, then press the glue discharge valve, and the black glue will be discharged. Open the black glue pressure reducing valve to discharge pressure, and tighten the valve after the pressure drops. The operation process of removing white glue is the same as that of black glue.
5、注意中空玻璃打膠機上的小零件的使用，中空玻璃打膠機作為一套中空玻璃加工設備而言，質量還是非常有保證的。但是損壞率比較高的就是像小吸盤、定位滑輪這些小零件。所以在日常使用過程中，還是對這些小零件精心呵護些，畢竟真的用壞了，也會影響工程進度不是。
5. Pay attention to the use of small parts on the insulating glass sealant machine. As a set of insulating glass processing equipment, the quality of the insulating glass sealant machine is very guaranteed. However, small parts such as small suction cups and positioning pulleys have a high damage rate. Therefore, in the daily use process, we should take good care of these small parts. After all, they are really worn out, which will also affect the project progress.
以上就是為大家介紹的有關中空玻璃加工設備的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.
The above is a detailed introduction to the insulating glass processing equipment, and we hope it will be helpful to you. If you have any questions, please contact us.
相關新聞 more+
- 中空玻璃丁基膠涂布機如何實現“絲滑”涂布？ 2026/07/09
- 雙組份打膠機如何讓密封膠“物盡其用”？ 2026/07/07
- 全自動鋁條折彎機如何為節能門窗打造“鋼筋鐵骨”？ 2026/07/05
- 全自動封膠線破解中空玻璃涂膠均勻性難題 2026/07/03
- 臥式丁基膠涂布機經濟實用實力展現 2026/07/01
- 丁基膠涂布機就是第一道防線的重要作用 2026/06/28
- 雙組份打膠機：精密配比與快捷混合的流體引擎 2026/06/21
- 全自動鋁條折彎機：合理成型與快捷制框的利器 2026/06/19
- 全自動封膠線：中空玻璃雙道密封的智能衛士 2026/06/17
- 中空玻璃加工設備：精密協同的工藝矩陣 2026/06/15
產品分類Product categories
聯系我們Contact us
