STJ03B型雙組份打膠機是我公司根據用戶在使用過程中所提建議，在STJ03型雙組份打膠機基礎上的改進。該機除了具有STJ03型打膠機所具有的所有優點，在操作上更加靈活輕便，打膠范圍也更廣。

　　The STJ03B two-component gluing machine is an improvement made by our company based on the suggestions provided by users during use. In addition to all the advantages of the STJ03 gluing machine, this machine is more flexible and lightweight in operation, and has a wider gluing range.

　　動力采用全氣動控制，主要零部件采用國際名牌產品，氣動元件選用正品AIRTIC，密封件選用德國德氏封，壽命長，性能穩定可靠。

　　The power adopts full pneumatic control, and the main components are international famous brand products. The pneumatic components are made of genuine AIRTIC, and the seals are made of German Deutschland seals, with long service life and stable and reliable performance.

　　該機外形美觀簡潔、結構緊湊，易于維護；打膠效率高，連續性好，混合均勻無色差，混膠效果不受環境溫度影響；設有管路高壓安全保護裝置和過載保護系統，有效防止膠管爆裂，減少故障率，使得操作更加簡單安全。A膠泵、B膠泵和配比泵的高壓閥口均采用合金材料進行特殊處理，硬度可達HRC70o，能有效避免因膠中的硬質顆粒損壞閥口。使得性能更加穩定，壽命更長。

　　The machine has a beautiful and simple appearance, compact structure, and is easy to maintain; High adhesive efficiency, good continuity, uniform mixing without color difference, and the adhesive mixing effect is not affected by environmental temperature; Equipped with high-pressure safety protection devices and overload protection systems for pipelines, effectively preventing hose bursts, reducing failure rates, and making operations simpler and safer. The high-pressure valve ports of A glue pump, B glue pump, and proportioning pump are all specially treated with alloy materials, with a hardness of up to HRC70o, which can effectively avoid damage to the valve ports due to hard particles in the glue. Make performance more stable and have a longer lifespan.

　　膠槍采用優質不銹鋼材料，耐壓高。混膠系統采用國際流行的靜態往復式混合器。由于不銹鋼混合芯表面光滑，有效降低了管道阻力，在同等壓力下出膠量大。

　　The glue gun is made of high-quality stainless steel material with high pressure resistance. The mixing system adopts the internationally popular static reciprocating mixer. Due to the smooth surface of the stainless steel mixed core, it effectively reduces pipeline resistance and produces a large amount of adhesive under the same pressure.

　　● 結構特點/Main Features

　　● Structural features/Main features

　　STJ03B型雙組份打膠機主要有A膠泵、B膠泵和配比泵、升降結構、比例檢測系統、混膠系統及氣動控制系統組成。

　　The STJ03B two-component gluing machine mainly consists of A glue pump, B glue pump and proportioning pump, lifting structure, proportion detection system, mixing system and pneumatic control system.

　　動力系統由我公司自行開發研制的主、副氣動馬達組成。該馬達經多家公司使用驗證其性能穩定、換向準確，壽命長，維護方便。

　　The power system consists of the main and auxiliary pneumatic motors independently developed and researched by our company. This motor has been validated by multiple companies for its stable performance, accurate commutation, long lifespan, and easy maintenance.

　　膠泵：A膠泵、B膠泵和配比泵均采用我公司研制的高粘度流體往復式高壓柱塞泵，結構簡單，性能穩定。密封件采用強化聚四氟乙烯，耐摩擦抗腐蝕，可適用絕大多數化學溶劑。使得性能更加穩定，壽命更長。控制閥采用靜面磨削，確保泵內壓力無泄漏。

　　Rubber pump: A rubber pump, B rubber pump, and proportioning pump all use our company's developed high viscosity fluid reciprocating high-pressure plunger pump, which has a simple structure and stable performance. The sealing element is made of reinforced polytetrafluoroethylene, which is wear-resistant and corrosion-resistant, and can be used in most chemical solvents. Make performance more stable and have a longer lifespan. The control valve adopts static surface grinding to ensure that there is no leakage of pressure inside the pump.

　　該系統為全封閉壓盤密封，使得膠體與空氣完全隔離，不反膠、不氧化。專用的反錐式逆止閥，有效隔離兩種膠體，防止膠的互竄，避免因膠水互竄固化堵塞管路。高粘度液體專用安全閥有效防止膠管爆裂，降低故障率。

　　The system is a fully enclosed pressure plate seal, which completely isolates the colloid from the air, without reverse glue or oxidation. A dedicated anti cone check valve effectively isolates two types of glue, preventing glue from interpenetrating and avoiding pipeline blockage due to glue solidification caused by interpenetrating. High viscosity liquid specific safety valves effectively prevent hose bursts and reduce failure rates.

　　升降系統采用手動轉閥控制。比例調節可通過調整滑塊在擺動桿上的位置來改變，當達到要求時擰緊螺母即可。

　　The lifting system adopts manual rotary valve control. Proportional adjustment can be changed by adjusting the position of the slider on the swing rod, and tightening the nut when the requirement is met.

　　比例測試時，打開球閥將兩種組份的出膠壓力調一致，用量杯接入即可測其比例。

　　When testing the ratio, open the ball valve to adjust the dispensing pressure of the two components to be consistent, and connect the measuring cup to measure their ratio.

　　適用膠種：硅酮結構膠、聚硫膠、聚氨脂膠、環氧樹脂膠等絕大部分雙組份膠。

　　Applicable adhesive types: most two-component adhesives such as silicone structural adhesive, polysulfide adhesive, polyurethane adhesive, epoxy resin adhesive, etc.

　　可加裝電加熱保溫裝置。

　　Electric heating and insulation devices can be installed.

　　本文由  雙組份打膠機 友情奉獻.更多有關的知識請點擊   http://www.txxfj.com  真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from a two-component gluing machine. For more related knowledge, please click http://www.txxfj.com Sincere attitude. We provide you with comprehensive services. We will gradually contribute more relevant knowledge to everyone. Please stay tuned