雙組份打膠機都由那幾部分組成
The two component glue machine is composed of those parts.
現在市面上常見的雙組份打膠機有三類，分別是立式雙組份打膠機、臥式雙組份打膠機和端槍式雙組份打膠機。今天小編跟咱們介紹的是臥式雙組份打膠機也能夠稱之為小型雙組份打膠機。
There are three common types of two-component glue beater on the market, namely vertical two-component glue beater, horizontal two-component glue beater and gun-end two-component glue beater. Today, Xiaobian introduced to us is a horizontal two-component glue beater can also be called a small two-component glue beater.
臥式雙組份打膠機因其占地空間小、出產高以及價格低的特色深受廣闊消費者的喜歡?，F(xiàn)在國內大部分中空玻璃出產企業都采購并運用這套設備。
Horizontal two-component glue beater because of its small space, high production efficiency and low price characteristics by the broad consumer favor. Now most of the hollow glass producing enterprises in China buy and use this equipment.
臥式雙組份打膠機首要是由兩部分組成，供膠體系和打膠體系。
The horizontal two-component glue machine is mainly composed of two parts, the glue system and the glue system.
供膠體系
Glue supply system
雙組份打膠機供膠體系
Two component glue machine
從字面稱號上就能了解供膠體系首要是為終中空玻璃涂膠供給膠體支撐的設備，該體系的好壞直接影響供膠是否安穩，假設咱們的打膠機供膠不安穩會形成終的產品打膠不豐滿或者有的當?shù)啬z多有的當?shù)啬z少導致產品質量嚴峻缺點。
It can be seen from the literal title that the colloid supply system is primarily a colloid support equipment for the final hollow glass coating, the quality of the system directly affects the stability of glue supply, assuming that our glue dispenser glue instability will form the final product glue is not full or some local glue more local glue less lead to product quality. Serious shortcomings.

供膠機首要有A組份提膠泵、B組份提膠泵， A、B膠增壓設備，高壓柱塞泵，A、B膠泵銜接設備，雙組分份額調理組織，高壓出口安全分流設備，液壓控制體系，氣動控制體系及電器控制體系等組成。
The main components of glue feeder are A-component glue pump, B-component glue pump, A-component glue booster equipment, high-pressure plunger pump, A-component glue pump connection equipment, two-component share conditioning organization, high-pressure outlet safety diversion equipment, hydraulic control system, pneumatic control system and electrical control system.
供膠體系的工作流程大致如下A組份提膠由電動齒輪泵供給，經管道輸送至油壓驅動的A膠高壓柱塞泵增壓。B組份提膠由氣動往復泵供給，經管道輸送至油壓驅動的B組分高壓柱塞泵增壓。
The working flow of the colloid system is as follows: A component glue extraction is supplied by an electric gear pump, and is piped to an oil-driven A-glue high-pressure plunger pump for pressurization. Component B glue extraction is supplied by pneumatic reciprocating pump, which is transported by pipeline to the pressurized B component high pressure plunger pump driven by oil pressure.
A、B膠的體積份額由雙組分份額調理組織調整，然后，一起送入打膠機混合器，混合器由36節以上混合設備組成，雙組份膠充沛混合后抵達打膠機體系，涂布于中空玻璃的邊際進行封邊。
The volume fraction of A and B adhesives is adjusted by two-component fraction conditioning organization. Then, they are fed into the mixer of the beater. The mixer consists of more than 36 mixing equipments. After the two-component adhesives are fully mixed, they reach the beater system and coat the edge of the hollow glass for sealing.
打膠機體系
Glue machine system
雙組份打膠機
Two component gluing machine
打膠機體系首要進行終的打膠操作，是由PCL控制體系，以及各種光感感應器組成。操作人員將等候涂膠的中空玻璃放入擬定的待打膠區域后設備主動檢測并根據操作人員所設定的參數進行全主動打膠機。如部分消費者需求進行三波打膠，設備也會主動檢測并主動進行三波打膠的操作。全程不需求人工進行干涉也不需求每塊玻璃都進行設置。
The glue beater system is mainly to carry out the final glue beating operation, which is composed of PCL control system and various photosensitive sensors. Operators will wait for gluing hollow glass into the proposed area to be glued after the equipment actively detect and according to the parameters set by the operator to fully actively glue machine. If some consumers demand three wave gluing, the equipment will actively detect and actively carry out three wave gluing operation. The whole process does not require manual intervention, nor does it require every piece of glass to be set up.
濟南昌盛機械,對雙組份打膠機感興趣的朋友可以關注我們http://www.txxfj.com，敬請期待更多精彩內容
Jinan Changsheng Machinery, friends interested in two-component glue beater can pay attention to our http://www.txxfj.com, please look forward to more exciting content