固化劑系統為全封閉系統，雙組份打膠機杜絕了空氣的混入，避免固化劑與空氣接觸而固化(對硅硐膠固化劑)。確保了介質流量的穩定性，提高混合效果。系統還設有管路超載的安全保護裝置，使操作和使用更加安全。

The curing agent system is a full closed system, which prevents air from mixing and prevents the curing agent from contacting with air. It ensures the stability of medium flow and improves mixing effect. The system is equipped with a safety protection device for overloading the pipeline to make the operation and use more safe.

由于雙組份密封膠的固化需要一定時間，因此，已涂了雙組份密封膠的玻璃應水平輕輕搬動,A組、B組份膠應保持清潔，嚴防異物進入膠中。

Since the curing of two-component sealant takes a certain time, therefore, the glass that has been coated with two-component sealant should be moved horizontally, and the A and B components should be kept clean, so as to prevent foreign matter from entering the glue.

基料泵、固化劑泵及比例泵搞壓閥口，均采用零泄露特殊合金研磨制造，比例泵設有獨特方便的可調式配比機構，大限度地保證雙組份膠近乎苛刻的配比要求，滿足玻璃幕墻或中空玻璃的比例要求。

Material pump, pump and pump pressure ratio of curing agent engage the valve port, with zero leakage of special alloy grinding manufacturing, proportional pump is installed with an adjustable proportioning mechanism, to ensure maximum two-component adhesive demanding ratio requirements, meet the curtain wall glass and insulating glass proportion.

在連續工作過程中，膠槍每次停止工作時間一般不得超過20分鐘，否則，應用A組份膠沖出全部混合膠，直至單一的A組份膠從槍口排出為止,高壓膠管不得強行擠壓、彎曲，防止影響系統正常工作。

In the continuous working process, glue gun each stopped working time is generally not more than 20 minutes, otherwise, the application of A component glue out all mixed glue, until a single component A glue from the muzzle discharge, high pressure hose shall not be forced to prevent extrusion, bending, impact the normal work of the system.

明顯因膠體固化所造成的膠槍、管路或整機的故障，一律不在保修范圍之內,定期給各泵的加油口加油，應保證油霧器內不斷油。

Any gel curing caused by guns, pipes or the whole machine failure, are not within the scope of warranty, and regularly to the pump refueling mouth refueling, should ensure that the oil mist constantly oil.

氣動雙組份打膠機，該機是國內優良的雙組份涂膠設備，A組份膠泵和固化劑泵分別采用液壓和氣動系統驅動，并采用無觸點電氣控制系統，換向靈敏可靠，關健機制部位采用高強度優良不銹鋼經熱處理工藝精制而成，使雙組份涂膠機的可靠耐用性大提高，確保了設備的優良品質。

Pneumatic two-component glue machine, this machine is a two-component coating equipment leading, the component of A rubber pump and curing agent pump adopt the hydraulic and pneumatic driving system, and adopts a non-contact electric control system, the reversing mechanism is sensitive and reliable, Guan Jian parts are made of high strength stainless steel after heat treatment technics to make a two-component coating machine to improve reliability and durability, ensure the quality of equipment.

本文由雙組份打膠機友情奉獻.更多有關的知識請點擊:http://linshi.jncsjx.com/我們將用的技術.真誠的態度.為您提供為多維度的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

This paper consists of two components of atx-ii friendship devotion. More related knowledge: Please click http://linshi.jncsjx.com/ we will use the most advanced technology. The most sincere attitude, to provide you with the most comprehensive service. More related knowledge and we will continue to offer. Please look forward to.